Description

The Harvia Legend family is Harvia's iconic design-forward wood-burning sauna stove, cast-iron-look door, robust black-steel housing, and an oversized stone capacity for the most generous löyly. Available in Legend 150, Legend 240 (also offered with Harvia's Greenflame clean-burning technology), and Legend 300 outputs. Each model supports External Feed (SL) configuration; Legend 240 SL and Legend 300 SL also come in the Duo Fireplace variant that adds a second viewing door for use as a feature fireplace in the anteroom.

Pick the Right Configuration for Your Cabin

Use the selector above to choose model and configuration, then choose the package tier. The configuration table below shows the SKU, the bundled sauna-stone quantity, and the matching insulated chimney kit for each configuration in the family.

Four Package Tiers

Sauna Stones (Tier 2 and Tier 3 packages)

Every "Heater + Stones" and "Heater + Stones + Chimney" package ships with the correct quantity of Harvia AC3020 sauna stones, olivine diabase, 10–15 cm size grade, 20 kg (44 lb) per box. Wood-burning stoves use the larger 10–15 cm AC3020 grade because the bigger stones pack better in the open top-loaded stone bed and hold heat longer through the natural rise-and-fall thermal cycle of a wood fire.

Insulated Chimney Kit (Tier 3 packages)

The "Heater + Stones + Chimney" tiers bundle the Harvia WHP1500 Pre-Packaged Chimney Kit, the factory insulated chimney assembly Harvia ships for standard residential sauna installations. The kit includes:

• 1500 mm insulated chimney pipe
• 1 m smoke pipe
• Rain cap
• Rain boot
• Chimney clamp
• Lead-through insulation and protector
• Lead-through cover

Choose your finish: every heater in this family is offered with either the Stainless Steel (WHP1500) kit or the Black (WHP1500M) kit at Tier 3, the chimney finish is your decision, not auto-matched to the heater. Most customers pick the chimney that visually complements the room they're installing into: black for traditional sauna interiors, stainless for modern / commercial finishes.

Important: The WHP1500 kit covers a standard residential chimney run. If your installation deviates from the standard 1500 mm vertical configuration, longer chimney run, tilted offset, attic insulation penetration, multi-storey installations, or commercial roof tie-ins, additional chimney components (WHP1000 / WHP500 extensions, WHP270SP smoke damper, WHP-AS tilted accessory kit, etc.) will be required. Contact Finnish Sauna Builders before ordering for a chimney layout consultation.

Installation Requirements

Wood-burning sauna heaters require a non-combustible floor surface, proper clearance to combustibles per the installation manual, a code-compliant insulated chimney run penetrating the roof or wall, and adequate combustion-air supply. Always defer to the included Harvia installation manual and your local AHJ for final clearance, chimney, and venting requirements. Most jurisdictions require a permit and inspection on wood-burning sauna heater installations.

Installation Manual

Download the Harvia wood-burning sauna heater installation manual (family-specific manuals also available, contact Finnish Sauna Builders).

Why Buy From Finnish Sauna Builders

As an authorized Harvia dealer, Finnish Sauna Builders sources every heater direct from Harvia US (Lewisburg, WV) with full factory warranty and dealer technical support. Free shipping on most Harvia wood-burning heaters; white-glove install coordination available nationwide.

Warranty & Support

Harvia wood-burning sauna heaters carry Harvia's standard residential limited warranty. Finnish Sauna Builders handles all warranty claims direct, no third-party return desk.

About Harvia

Harvia has been building world-class sauna heaters in Finland since 1950. Every Harvia product carries forward more than 70 years of Finnish craftsmanship, materials science, and a relentless focus on the perfect löyly, the heated, humid burst of steam released when water meets hot sauna stones.